Why refrigerator doesnt cool

If the coils are dirty, the refrigerator will have to work harder to release the heat. The condenser coil should be cleaned once per year and can be cleaned even more if you have a lot of dust or pet hair in your kitchen. A dirty coil may affect performance, but you can easily clean it using a vacuum or long brush.

Cleaning it should allow it effectively go back to releasing heat from inside. The condenser fan motor works by drawing air over the condenser coils to cool them. Without a functional fan, your refrigerator could easily overheat and not cool properly. You can locate your condenser fan motor behind or underneath your refrigerator. If the fan motor is not working, it will most likely require professional repair.

There are several reasons for your refrigerator not to get cold enough. Please see if one of the following will solve the problem. The temperature outside may prevent your appliance from functioning properly, especially if it is placed in a garage or somewhere with no heating. If you think this might be the issue, relocate the appliance.

The cold air inside your appliance needs to be properly isolated from outside temperatures. See if there are gaps between the door seal and the cabinet. If you find any, adjust the door seal by gently pulling away from the door using your fingers.

For any openings that persist, you may need to replace the seal. Your refrigerator needs proper air circulation in order to function properly. Overloading it may block the airflow inside the cabinet. The condenser is responsible for releasing the heat your appliance produces into the air around it.

Its wires cannot perform efficiently if they are covered with dirt or dust. Unplug your appliance and locate the coils either at the back or the bottom of your appliance. If your appliance has internal lighting, its bulb should go out while the doors are closed. Try closing the doors slowly. I will let her know this os she can hire a technician to repair it. My refrigerator cool above cabin but not cool in below cabin double door refrigerator mechanic attend three more time but not successful so the same problem continued.

So please give the idia. Compressor of my refrigerator was changed by machanic and gas was filled. It started cooling but no ice formed in ice chamber. After 20 days it stoped cooling again. New gas was filled and temp in the ice chamber came down to -5 as noted by me.

After one hour again refrigerator stopped working no cooling. What may be the cause? When the temperature in the fridge warms up do you notice if the compressor and fans are still running or no?

Did you check that out? My refrigerator cools intermittently after refilling gas. What could be the Problem? What do you Think?

The defrost heater is OK and the defrost thermostat is OK what control the defrost in inverter ref. Your email address will not be published. Currently you have JavaScript disabled.

In order to post comments, please make sure JavaScript and Cookies are enabled, and reload the page. Click here for instructions on how to enable JavaScript in your browser.

Frosted evaporator coil There are evaporator coils and circulating fan in the freezer zone of the refrigerator. You might be able to fix the situation yourself. Start by noting other clues, such as strange noises like scraping, which might indicate a problem with the condenser fan. Check to see if the freezer is freezing , so you will know whether both the fridge and freezer are not cooling. Depending on the cause of your refrigerator not cooling, the following procedures might help.

This might sound too simple to be the answer, but a power cord that has worked loose in its outlet or a flipped breaker will shut the entire fridge down. Open the door. If the light comes on, the refrigerator still has power and you can move on to the next cause and solution. Still no light? Check your main electrical panel for a flipped breaker and switch it back on if necessary. Even with some of the top brands, like KitchenAid refrigerators not cooling, the problem might have a simple solution.

Most refrigerator manuals include troubleshooting steps or tips and error codes specific to their brand. For example, when a Samsung refrigerator is not cooling, it might have been accidentally set to Demo Mode. When a Whirlpool refrigerator is not cooling, check the condenser coils, since they can get covered in dirt and dust.

When a Frigidaire refrigerator is not cooling, the culprit also can be dirty condenser coils, or a common solution of adjusting the temperature setting in this and other models. Thermostat dials inside the fridge can get bumped by cartons of milk or other items, though, which can change the set temperature.

Even exterior digital thermostats can be inadvertently changed by little fingers or if someone leans against the control panel, unknowingly raising the temperature. Many digital panels come with the ability to lock the settings for just that reason.